Leading multicore silicon conference set for September in Bristol
Multicore Challenge Conference 2012
24 September 2012
Bristol (UWE, French Campus)
TVS and ICT KTN are holding the 2012 Multicore Challenge Conference on Monday, 24 September 2012 with speakers, case studies, workshops and tool demonstrations on the latest techniques and technologies for developing systems with multiple processor and graphics cores.
Leading speakers from Imagination, Intel and the University of Bristol will also be part of a panel session at the end of the day on the challenges of developing and using multicore silicon chips. Sign up here
Provisional agenda for the Multicore Challenge Conference 2012
Related articles
Bath researchers investigate energy network complexity
Researchers from Bath are looking at new ways to make the energy network more efficient and robust.
The team from the University’s Department of Computer Science, in collaboration with Low Carbon South West and Grid Scientific, has funding from the Technology Strategy Board (TSB) to investigate how a ‘coherence engine’ could enable operators to achieve significant business and operational benefits and will consider the specific scenario of responding to failures in the network more efficiently.
The introduction of Smart Power Distribution to energy networks, as part of the evolving Smart Grid initiative, will see a sharp increase in the number of systems that rely on sensors and other intelligent devices. A coherence engine may support Distribution Network Operators in extracting the maximum value from data provided by these devices.
The role of the coherence engine could be of importance as software enabled devices become more prevalent, data proliferates, fault symptoms become less obvious and network and operations complexity increases.
By developing an understanding of the anticipated operational and technical impacts of the introduction of these technologies, the researchers would be able to support Grid Scientific with its development of a coherence engine that could improve operations processes in distribution networks.
Low Carbon South West, a membership organisation which creates sector partnerships between businesses, academia, investors and local authorities to promote the growth of environmental technologies and services in the South West region, is leading the partnership and will also disseminate the partnership’s findings across it membership.
Board member Simon Bond said: “Current systems for monitoring faults in the energy network rely on their independent view of activity. As the network becomes more complex and new technologies are introduced, this lack of communication between monitoring systems could become problematic.
“Through this project the partners are aiming to determine the feasibility of a centralised view of the network which will address these complications and deal with a proliferation of network data.”
Grid Scientific, a company which designs software to support the evolution of today’s energy networks, has been investigating the potential of data coherence for energy networks over the last year. The company also draws on over 20 years of experience in telecoms networks where similar changes can be viewed as an analogue for the changes now expected in energy networks. If the feasibility study is encouraging, Grid Scientific plans to develop new data coherence products for the energy network market.
Eric Brown, Managing Director of Grid Scientific, said: “The challenges and opportunities we are now seeing in energy networks are similar to those seen in telecoms when major changes took place in that sector in the 1990s. However, substantial differences between the electricity and telecoms environments mean that a level of technical and operational innovation will be required,” he said. “We’ll be working with the research group to determine where the latest thinking in computer science can be applied to deliver solutions for energy networks.”
Dr Rachid Hourizi, researcher in human and system interaction from the University of Bath’s Department of Computer Science, said: “Understanding the feasibility of coherence to successfully meet the smart power distribution data challenges will depend on collaborative and cross discipline innovation from the electricity, IT and communications sectors. If feasibility can be shown, this project could lead to the construction of a prototype coherence engine for fault management and the extension of the approach to address improvement in other processes in the electricity network.”
Related articles
New £715K laboratory to advance cell research
A new £715K laboratory at the University of Bristol aims to equip scientists in the South West with the facilities they need to carry out the latest techniques in cell biology research.
A £715,000 grant from the Wolfson Foundation, coupled with significant investment from the University of Bristol, has enabled the refurbishment of space in the University’s School of Medical Sciences to provide a state-of-the art laboratory space for cell biologists.
The facility will house three research teams, led by Professor George Banting, Professor David Stephens and Dr Jon Lane, who share a common interest in understanding the molecular mechanisms that underlie cell function — how the tens of thousands of individual components within a cell work together for the cell to do its job.
Professors Banting and Stephens will use the facility to study how proteins are delivered to the right place(s) within cells, how they are exported from cells, and how cell membranes are organised. This research is fundamental to cell biology as it has implications for a range of disease states as well as for tissue organisation and responses to pathogen (bacterial and viral) infection.
Dr Lane’s lab applies an understanding of membrane and cytoskeletal dynamics to “autophagy” — a process of cellular quality control that is upregulated during cell stress. This process is vital for normal organismal development, but can give rise to degenerative diseases and cancer if it goes wrong.
Professor Leo Brady, Head of the University’s School of Biochemistry said: “Cells are the building blocks of most forms of life. This investment from the Wolfson Foundation helps to keep Bristol at the cutting edge in cell biology research.”
The refurbishment also provides bespoke space for sophisticated microscopy systems that have been purpose built within the Stephens and Lane research groups. These systems complement the excellent imaging equipment available in the nearby Wolfson Bioimaging Facility – this unique facility was funded from a £1 million investment from the Wolfson Foundation and completed in 2008. It is regularly used by around 100 research groups across the University. It is situated is in close proximity on the same floor as the new laboratory space.
Related articles
Bristol researchers aim for super-bright LEDs
Researchers in Bristol are working on a European project to increase the performance of white LEDs by a factor of 10 for brighter car headlights.
The €3.8m GECCO project aims to use vertical structures for the new LEDs. Modern high-performance LEDs already provide a bright light output at high efficiency and are used for automobile headlights. At present though, the production process for these kinds of LEDs is still not cost efficient enough and also the efficiency of these LEDs needs further improvement.
The international team of the GECCO project includes the Technical University of Braunschweig in Germany, Madrid, Lodz and lighting company OSRAM in Munich and Regensburg.
Vertical LEDs from the GECCO project
Up to now, LEDs are being constructed in a planar way, meaning in layers and completely flat. The more light is being required, the more wafer area has to be produced, which is an expensive and laborious approach. The aim of the GECCO project is to assemble LEDs in a three-dimensional way so that actually every LED consists of a ‘light emitting tower’ from which the entire vertical surface is emitting light. Obviously the surface of the tower is much larger compared to the ground area of a planar LED. And in fact, it is exactly the gain of light emitting area that leads to a higher light output.
This means the manufacturing of an LED becomes much more cost-effective and as a result replacing ancient electric bulbs, halogen lamps as well as energy saving bulbs to LEDs is getting a lot more profitable. Considering the fact that currently 20 % of electrical energy worldwide is being utilized for illumination, this innovation provides an enormous potential as far as cost-effectiveness is concerned. In addition, LED lighting is particularly important for future electric mobility, particularly for electric cars.
The dimensions of the ‘light emitting towers’ are within the micrometer range. This means approximately one million LEDs fit on an area of one square millimeter. This process requires utmost precision which can only be achieved by applying nanotechnology manufacturing techniques.
The GECCO project is coordinated by Prof. Andreas Waag from the Institute of Semiconductor Technology at Braunschweig.
Related articles
SouthWest crowdfunding helps City startup avoid venture capitalists
A London startup Escape the City has used Exeter-based crowd funding speciliasts Crowdcube to raise £600k in less then two weeks after turning down two offers of venture capital funding.
Initially the company raised £500k in 9 days and then extended the pitch by £100k to £600k, raising the extra tranche in under 4 days.
Ironically, Escape the City is a website that helps professionals to make career transitions. It has a community of more than 65,000 people who want to escape from unfulfilling corporate jobs – be it launching a start-up or joining a quirky company or non-profit organisation.
Related articles
Kickstarter startup funding to come to the UK
The Kickstarter crowdfunding scheme for startups and projects is aiming to come to the UK in the autumn.
The company offers start-ups a route to raise funding for specific projects from the general public in return for ‘investor’ benefits. A target amount to raise is set and if that amount is not reached, nothing is funded. Unlike Exeter-based crowdfunding venture Crowdcube, the benefits do not currently include shares.
The latest hit project on Kickstarter is Ouya, a low cost games console that comes with its own software development kit (SDK) so that it can be deliberately hacked (or programmed, as we used to say!). The $100 Android-based console is to the Raspberry Pi what the old ZX80 DIY computer kit was to the BBC B Microcomputer. Funders get their name engraved on their own console, or, for enough money, on the whole production run.
UK companies have been using Kickstater in the US. Xenonauts, a game by Goldhawk Interactive in London, last month raised $155,000 from nearly 5,000 small investors. However, in order to set up a Kickstarter account, you have to use Amazon Payments and in order to use Amazon Payments you have be an American citizen, and that has caused problems for international companies.
Related articles
Memorial for South West entrepreneur Kenn Lamb
Serial entrepreneur and stalwart supporter of South West innovation, Kenn Lamb, has lost his long fight against cancer. A memorial service will be held at the Memorial Woodlands, Earthcott Green, Alveston, Bristol, BS35 3TA on Thursday 19th July at 12 noon.
It was as CEO of Hewlett Packard spinout Elixent that saw him take on a wider role in the industry, building up the startup until Panasonic took over the business in 2006. His last role was CEO of Cambridge startup Cyan Technology, re-building the company while commuting from the SouthWest.
He started out at Plessey Semiconductors in Swindon, becoming data products manager, but moved into the electronic design tool industry at Comdisco and then Cadence Design Systems. Moving back into hardware he was the European General Manager at FPGA designer Actel (now part of MicroSemi) followed by roles at development system house Pentica Systems and IP developer Arc (now part of Synopsys).
He was a strong supporter of the industry and of the SouthWest, influencing and assisting many people throughout his career with his humour and expertise.
For information about the memorial please contact nick@flaherty.co.uk
GKN Opens Engineering Centre In Filton
GKN Aerospace has opened a new engineering and technology center at its site at Filton near Bristol. The centre is GKN’s fourth and will focus on future wing structure design and manufacture. The company expect to increase the engineers on the site from 5 to over 100.
via GKN Opens Engineering Center In Filton, UK | Aviation International News.
SouthWest engineering technology reveals secrets of Roman coins
Computer rendered image of the coins extracted from the CT scan data of the complete pot from the Selby Area Hoard’ Credit: University of Southampton.
Engineers from the University of Southampton are collaborating with the British Museum to examine buried Roman coins using the latest X-ray imaging technology.
The powerful scanning equipment at Southampton’s µ-VIS Centre for Computed Tomography is being used to examine Roman coins buried in three archaeological artefacts from three UK hoards.
The centre’s equipment can scan inside objects – rotating 360 degrees whilst taking thousands of 2D images, which are then used to build detailed 3D images. In the case of the coins, the exceptionally high energy/high resolution combination of the Southampton facilities allows them to be examined in intricate detail without the need for physical excavation or cleaning. For those recently scanned at Southampton, it has been possible to use 3D computer visualisation capabilities to read inscriptions and identify depictions of emperors on the faces of the coins – for example on some, the heads of Claudius II and Tetricus I have been revealed.
“Excavating and cleaning just a single coin can take hours or even days, but this technology gives us the opportunity to examine and identify them quickly and without the need for conservation treatment at this stage. It also has potential for examining many other archaeological objects,” said University of Southampton archaeologist, Dr Graeme Earl. “The University’s Archaeological Computing Research Group can then take this one step further – producing accurate, high resolution CGI visualisations based on scan data. This gives archaeologists and conservators around the world the opportunity to virtually examine, excavate and ‘clean’ objects.”
The scanning technique is already yielding some fascinating results and the possibility of identifying a hoard of coins in a pot, without removing them, is very exciting, says Dr Roger Bland, Head of Portable Antiquities and Treasure at the British Museum.
The three objects examined at Southampton are:
- A cremation urn containing nine coins, dating from AD282, found in the Cotswolds. This item in particular would take months to excavate – with archaeologists needing to carefully examine bone fragments and remains to extract more information about its past.
- An estimated 30,000 Roman coins discovered in Bath, dating to around AD270 and concreted together in a large block weighing over 100 kilograms (radiograph image only).
- A small pot dating to the 2nd century found in the Selby area of East Riding in Yorkshire.
“Our centre examines a wide variety of objects from the layup of individual carbon fibres in aircraft wing components, to the delicate roots of growing plants, and now ancient Roman coins. It is our integration of state-of-the-art imaging hardware, world-class computing and image processing expertise, which allows us to break new ground,” said Professor Ian Sinclair, director of the µ-VIS Centre for Computed Tomography. “We have recently formed an inter-disciplinary research group for Computationally Intensive Imaging, which brings together a broad spectrum of world-class imaging activities from disciplines across the University – of which this project is an excellent example.”
The University of Southampton and the owners of the artefacts have plans to share the scan data with the public, hopefully through future exhibitions and online.
Related articles
New creative sector hub for Bristol
Bristol is host to one of four new Knowledge Exchange Hubs for the Creative Economy launched today by the Arts and Humanities Research Council (AHRC).
The Research and Enterprise in the Arts and Creative Technologies – REACT – centre is led by UWE Bristol with a consortium that includes the Universities of Bristol, Exeter, Bath and Cardiff and the Watershed Arts Trust.
REACT will also work closely with creative businesses, including SMEs, arts and culture organisations and other agencies.
REACT is directed by Professor Jon Dovey and based in Watershed’s Pervasive Media Studio.
Creative sector hub set up in Bristol.
Related articles
Altran Praxis relocates Bath office
Insider News South West – Altran Praxis relocates office to the Southgate Centre in Bath
Venturefest Bristol 2012 announced
Wednesday 7th November 2012
New venue: UWE Exhibition and Conference Centre
Venturefest Bristol is back for a second year to showcase the latest new technology business ideas and innovations.
The venue moves from the Bristol & Bath Science Park to the Exhibition Centre at UWE, bringing together technology businesses at all stages, from pre-commercial to established organisations. Venturefest Bristol 2012 aims to offers opportunities to businesses regardless of their size, sector or location within the UK.
Last year’s event attracted more than 700 attendees and this year promises to be even bigger. Venturefest is aimed at anyone who has an early-stage technology business idea and is looking for support and advice to get that idea off the ground. Attendees can listen to other entrepreneurs’ stories, get IP and funding advice and to network with like-minded people.
http://www.sciencecitybristol.com/pages/2-venturefest-bristol
Related articles
Swindon cellular technology leader breaks 50,000 unit barrier
Swindon-based developer of 3G and LTE intelligent small cells Ubiquisys has its technology shipping in over 50,000 public access small cells commercially deployed by operators in several countries.
The company also announced that it has completed the first deployments of its new G7 indoor small cell hotspot, featuring its ActiveCell technology, with two operators in Asia after successful field trials in extremely-challenging public environments.
The Asian G7 deployments have tested extremes of data and signalling traffic, including hotspots experiencing 10,000 users moving in and out every day, with each user typically running HSPA data for over 25% of the time. Indoor public spaces such as cafes, stores, malls and airports are ideal environments for small cells – as operators face rapidly increasing data usage and have abundant fixed broadband available for backhaul.
“We are seeing rapid growth in demand for our public access small cells solutions, particularly in the demanding Asian market,” said Will Franks, CTO and co-founder of Ubiquisys. “These deployment scenarios represent significant technical challenges, but our adaptive technology was designed to run in open-access mode from the outset. We’ve built a substantial base of public access small cell deployments over the past two years and this real-world experience led to the development of ActiveCell technology.”
The Ubiquisys G7 range of 3G/LTE/WiFi public access small cells feature new ActiveCell technology developed on the back of years of experience in deploying small cells in public environments. ActiveCell complements Ubiquisys’ globally proven ActiveRadio and ActiveSON systems for small cell self-management and self-organising clusters. It extends these capabilities to provide carrier grade symbiotic interworking with the macro network, in particular to manage interference effects, whilst retaining the advantages of simple installation and commodity IP backhaul. ActiveCellconsists of groups of software-encapsulated techniques:
* Automatic cell sizing: preserves the target quality of service in hotspots.
* Loaded cell adaptive radio resource management: continuous monitoring of the radio environment even while serving active users.
* Hotspot robustness: ensures the best possible quality of service during high spikes of transient users.
* Edge processing of smartphone signalling to significantly reduce the load on the core network.
The challenges facing public access small cells arise from the sheer volume and unpredictability of traffic, the particular demands of smartphones, and the need to adaptively complement neighbouring cells. Current small cell solutions fail to convince on one of two counts:
* Traditional solutions such as picocells require manual planning and lack adaptive behaviour in operation, which makes them both prohibitively expensive and unsuitable for dense hotspot deployment.
* Small cells created by simply renaming residential femtocell technology are designed for relatively benign closed-mode operation, and are not robust enough to cope with the traffic demands of a public access hotspot environment.
Small cells running Ubiquisys ActiveCell technology combine low operational costs with the ability to deal with the real-world requirements of mobile users in public spaces. They have been field proven to meet the demanding network performance metrics of the macro networks they complement.
Related articles
South West researchers develop first medical technology to use Kinect for stroke patients
Researchers at the University of Southampton and Roke Manor Researchhave used Xbox computer technology to help stroke patients recover manual agility at home. The team is now looking to use the medical technology, which measures hand joint movement, to develop games to help the patients recovery.
The Xbox Kinect works by monitoring whole limb movements allowing controller-free gaming; the gamer becomes the game. However, the University team has taken it a step further to create an algorithm that tracks and measures hand joint angles and the fine dexterity of individual finger movements. The ultimate aim is to capture the data while the patients follow exercises on a TV screen.
Roke Manor, based outside Bournemouth, has been designing complex electronic systems for decodes and is a key design house in the region.
The project aims to help people recovering from a stroke to do more regular and precise exercises so that they recover faster. The data collected will be fed back to the therapists caring for the patient so they can continually monitor progress, reducing the need for frequent hospital visits.
This new system has been developed to complement the home-based physiotherapy care already offered to patients in the UK, and follows a recent Stroke Association report which highlighted that stroke survivors are being denied the chance to make their best recovery because of a lack of post-hospital care.
“Recovering from a stroke can be a daunting and distressing time for patients and their families. Through our research we know that many people recovering from a stroke find their at-home exercises repetitive and often demotivating,” said Health Sciences academic Dr Cheryl Metcalf, at the University of Southampton who is supervising the project. “If they are already finding it difficult and frustrating to move their hands, they need something to encourage them to try harder. We wanted to create a more engaging way to help them recover faster. Using the Kinect we have been able to take a commercially available product and develop a highly novel tool that aims to be both cost effective and clinically applicable.”
The next objective is to create a series of computer games to make the rehabilitation process more interesting for the patient. The games will adapt to each individual’s ability and help motivate them to reach rehabilitation goals by feeding back higher scores if their joint movements improve.
“Strokes are the largest single cause of severe disability in the UK and it is estimated that every year half of the 100,000 stroke patients experience upper limb problems. This project could make a significant difference to the wellbeing of those affected,” said Simon Wickes, Healthcare Business Sector Manager at Roke. “As Roke has a strong R&D pedigree in mobile and e-health devices, we were able to provide the technical guidance and support to help the students realise this exciting and valuable project. Not only is it a cost effective out-of-the-box solution, by reducing patient recovery times it could also have a positive impact on the £2.5 billion which the care and rehabilitation of stroke patients cost the UK health and social care system each year.”
Using the Microsoft Kinect to help stroke patients recover
Related articles
SouthWest startup to launch novel satellite system at Farnborough Air Show
SouthWest startup Phasor Solutions is to launch a novel low cost phased array antenna system for broadband satellite communications at the Farnborough Air Show next month.
Phasor, based in Ledbury, Herefordshire, has developed a system that allows moving vehicles such as aircraft, ships or trucks to communicate with stationary satellites, or antennas that track moving satellites, in real time with no moving parts. It had originally developed the antenna system to provide broadband connections on trains, and is now targeting the multi-billion dollar satellite communications and radar market with a unique, ground breaking design that it says provides order of magnitude improvements over competing solutions.
Phasor Solutions was founded by Ledbury venture capital firm Anglo Scientific and circuit designer Richard Mayo in 2005 to develop flat, high gain antennas to fit on the roof of moving vehicles. Since then, Phasor has raised venture capital funding through a pool of investors and has built a strong team from the South West UK. Mayo was a member of the founding team of Microcosm Communications in Bristol that developed more cost effective optical components using CMOS and BiCMOS silicon and was sold to Conexant Systems. Chief Operating Officer Tim Esparon was VP of Manufacturing Operations at Microcosm spin out Phyworks in Bristol.
The Phasor chips include all the radio frequency functions (amplifiers, oscillators) and phase shifting circuits, as well as the logic and data modulation/demodulation required. This approach to phased array technology aims to reduce costs by over 10x and provide added value such as a flat design (less than 1 inch high), conformal to any surface, modular approach, and high reliability as there are no moving parts. One of Phasor’s initial targets is wireless internet access on trains, an estimated available market of over 500 million users worldwide. However airborne satcoms and other Comms-On-The-Move (COTM) applications are likely to be larger markets.
“Phasor is carving the way for the next decades of phased arrays by providing a paradigm shift in satellite communications. It took the industry over 40 years to develop phased arrays which are typically expensive to buy and to operate. But now, with the invaluable support of our partners, and in particular TowerJazz, we have been able to deliver semiconductors which provide an order of magnitude reduction in costs compared to current solutions,” said David Garrood, Managing Director at Phasor Solutions. “Phasor has been able to achieve this milestone with the support of the TowerJazz team and relying on the stability and performance of its SBC18HX process.”
The chips use a 155GHz silicon germanium (SiGe) technology from Californian chip foundry TowerJazz, rather than the more traditional and more expensive gallium arsenide technology. This allows more features to be added to the chips and makes the system dramatically cheaper
“Our advanced SiGe BiCMOS technology provides higher integration at lower cost than GaAs solutions, allowing cost-effective satellite communications on the move to be realized,” said Dr. Marco Racanelli, Senior Vice President and General Manager for the RF & High Performance Analog and Aerospace & Defense Business Groups at TowerJazz. “Together, we have begun volume manufacturing to enable a high gain antenna, which consists of 20,000 chips. In addition, we continue to invest in advanced SiGe and recently announced our latest process, SBC18H3, which supports devices with speeds of 270GHz and offers a path for further performance, power, and noise improvement in next-generation products.”
Related articles
Finnish identity software startup sets up in Bristol
Finnish open source software startup ForgeRock is opening its UK headquarters in Bristol next week for the development of software around identity management.
The company recently raised $7 million in its first round of funding from global venture capital firm Accel Partners which also backed the developer of the Angry Birds app. “We were looking for investors with a track record of backing companies which subsequently come to define their category.” said Lasse Andresen, ForgeRock Founder and CEO. “In Accel, we believe we have found the right partner to help ForgeRock define the Identity technology category globally. We will use the funds to build further on the market traction and dramatic global growth we have demonstrated over the past 2 years”.
ForgeRock offers a unique, open platform approach to Identity software with its I³ Open Platform. This provides a unified approach for identity management from Authentication, Access Management, and User Entitlements, to Identity lifecycle management and provisioning. The open source approach can be use on in-house, private or public cloud infrastructure.
“We think identity management is a crucial issue for most businesses as they struggle to deliver appropriate information and application support to employees, partners, and customers via a combination of datacentres, the cloud, PCs, and mobile devices. Customers and channel partners repeatedly referred to the exceptional breadth, scalability and reliability of ForgeRock’s products as well as the expertise and responsiveness of the management team. We believe ForgeRock is well positioned to deliver the easiest to deploy and highest performance identity management software suite in the market and is unique in being able to address the needs of the largest global businesses, as well as small to mid-size companies,” said Bruce Golden, Partner, at Accel Partners.
Related articles
Bristol software firm develops first anti-virus protection for TVs
Televisions are increasingly becoming ‘smart’ and connecting to the Internet, but protecting your TV against threats such as malware and viruses has been lacking. Ocean Blue software, a Bristol-based TV software developer that works with TV and set top box makers around the world has developed the first anti-virus protection for your TV using cloud technology.
It has partnered with IT security leader Sophos to develop a cloud-based antivirus solution that can be shipped either as part of the Ocean Blue middleware or as a stand-alone client for solutions with their own middleware.
According to Futuresource Consulting, by 2015 over 80 percent of new televisions and set-top boxes will be Internet-ready. As many of these products will be based on either Linux or Android, they will be capable of downloading and running remote applications. While this connectivity brings many new features, it also exposes these devices to potential viruses and other malware, making antivirus protection essential.
Anti-virus software for your TV
The new Ocean Blue software was a joint effort based on the combined forces of SophosLabs advanced antivirus expertise and the category-leading Ocean Blue Software Television and Set top Box middleware. The end result protects against the maximum number of threats, with the lowest demand on system resources.
“Almost all new connected TV products are at risk from malware” says Ken Helps, founder and CEO of Ocean Blue Software. “This partnership with Sophos will allow us to provide manufacturers with middleware already prepared to defend their products against attack.”
“Most consumers don’t realize that Smart TVs are just as vulnerable to threats as other devices,” said Michael Rogers, Vice president, global alliances and OEM at Sophos. “This partnership with Ocean Blue Software provides tremendous opportunity to allow consumers to take advantage of the features Smart TVs offer, while ensuring their home networks remain secure.”
Related articles
Bristol Heart Institute to trial new tool to combat high blood pressure
Doctors at the Bristol Heart Institute (BHI) are the first in the South West to offer patients with high blood pressure the opportunity to control their condition with a new type of treatment.
The research study is being undertaken at the Bristol Heart Institute and hopes to add to the body of research around a treatment called renal denervation. The team comprises doctors and researchers from the Bristol Heart Institute, Dr Angus Nightingale and Dr Andreas Baumbach; the University of Bristol, ProfessorJulian Paton and the Richard Bright Renal Unit, Professor Steven Harper.
High blood pressure (hypertension) is a condition where the force that blood is exerting on the walls of the arteries of the body is higher than desirable. When left untreated this can significantly increase the patient’s risk of stroke, heart failure and chronic kidney disease.
High blood pressure afflicts one billion people worldwide and its prevalence increases with age, obesity and sedentary lifestyles. Around 10- 20 per cent of patients with the condition are unable to reach their target blood pressure even though they have been prescribed drug treatments. For these patients renal denervation may help.
The procedure involves severing the nerves that connect the kidneys to the brain and carry signals to control blood pressure. A wire is passed into the patient’s blood vessels feeding the kidney and the tip of the wire is heated to burn the nerves running along the outside of the vessel. The tiny burns are done in a spiral pattern around the blood vessels until the connections are severed.
Dr Andreas Baumbach, consultant cardiologist at the BHI and Tutor in Cardiac, Anaesthetic and Radiological Sciences in the School of Clinical Sciences, said: “This is a fascinating new way of dealing with hypertension. Research results published in The Lancet show that patients who had the procedure saw their blood pressure drop by around 20 per cent and blood pressure seems to fall continuously even after two years. We are very keen to further develop this intervention and find out, in which patients it works best and how to predict a successful treatment.”
Dr Angus Nightingale, consultant cardiologist at the BHI, said: “Recent results presented at the American College of Cardiology meeting, suggest that this treatment may be an effective way of reducing blood pressure in a group of people that we have found hard to treat in the past.
“The research we are doing brings together doctors from across Bristol including GPs and specialists. This is a great example of doctors from the Bristol Heart Institute and scientists from Bristol University are making available cutting edge technology to people in the South West.”
New £3.8m Industrial Doctoral Centre for New Materials in Bristol
The University of Bristol is to set up a new Industrial Doctorate Centre to provide the composites manufacturing industry with elite research engineers of the future.
The £3.8m IDC will be based at the National Composites Centre, a research centre led by the University of Bristol and industry to provide the composites manufacturing industry with engineers equipped with the necessary advanced technical and leadership skills required for effective adoption of new knowledge and technologies in composites manufacture.
The IDC is integral to the EPSRC Centre for Innovative Manufacturing in Composites EPSRC Centre and will support over 30 EngD programmes, each over four years, where selected research engineers will undertake specialist training and conduct an industrially focused research project, spending 75 per cent of their time at a company. The IDC will have access to a complete range of equipment and techniques required for composites manufacturing research. It is open to all UK industry and academia and will eventually offer wide access to its bespoke taught modules.
Ivana Partridge, Director of the IDC, explained that the project demonstrates an urgent and growing need in the UK polymer composites manufacturing sector for greater numbers of technically qualified individuals. She said: “The new IDC fills an existing gap in the provision of industrially focused higher level education in the UK.”The research engineers are expected to encourage joint industry and academia collaboration to a much greater extent than is usual in classical PhD training.”
Professor Michael Wisnom, Director of the University’s Advanced Composites Centre for Innovation and Science ACCIS, said “The new IDC based at the NCC and in industry will focus on applied research at technology readiness level 3-5, and will be highly complementary to the Bristol ACCIS Doctoral Training Centre, where PhD students work on more fundamental research topics at TRL 1-3.”
The IDC is now looking for industrial projects and supervisors to run innovative composites manufacturing projects, providing a commitment of cash support for research engineer training and stipend top-up. Eligible research engineers with an engineering/science background and an interest in industrially focused composites manufacturing research should apply through idc@epsrc-cimc.ac.uk, for a position with a tax-free stipend of £20k pa.
Science fair boost in Bath this weekend
Over 800 local school pupils will be getting to grips with science in unusual ways in a two-day hands-on science fair opening at the University of Bath on Friday 9 March.
The Bath Taps into Science fair provides school children and their families with the opportunity to discover science at a fun, hands-on fair. Everything from making a special type of ’slime’ with very odd properties, trying out lego robotics, finding out about the life of a bee, magical mathematics, digging up dinosaur bones to astronomy, and liquid nitrogen will all feature in this two-day science fair. Stalls will be run by staff and students from the University of Bath, Bath Spa University, Bristol University and the University West of England (UWE) and other colleges. Some stalls are also run by school children from local schools and societies like the Galenicals.
Day two of the Science Fair (Saturday 10 March) is held for the public in the city centre, with lots of families coming year after year. Based in Green Park Station, the venue is smaller with fewer stalls but this year will feature a brand new event – a maths and Morris dancing workshop from 2.30pm.
Mathematics professor Chris Budd said: “This year we are bigger than ever, with many schools coming and presenting, a team of science communications experts from Ireland and even a Morris Dancing Group. We will truly be dancing with science.”
The Bath Taps into Science event opens with a bang with a showcase lecture by Professor Budd on Wednesday 7 March. Titled Maths in and out of the zoo, Professor Budd will challenge guests to use their imagination and follow him as he takes a tour of a zoo in order to look at mathematics from a completely different perspective. The lecture will take place at the University of Bath Claverton campus in the University Hall and starts at 7pm. It is aimed at families and young people.
The fair is organised, run and supported by hundreds of volunteers from the University of Bath, Bath Spa University, Bristol University and the City of Bath College together with Keele University Earth Sciences Education Unit and organisations including the Bath Royal Literary and Scientific Institution, The Ethical Property Group, B&NES Waste Services, the Herschel Society, Wessex Setpoint, the Propioception Trust and Science City Bristol.
On Friday 9 March the fair will be held at the University of Bath’s Founders’ Sports Hall (10.30am to 3pm). The second day will take place at Green Park Station on Saturday 10 March (10am to 4pm). The event is funded by the University of Bath’s Widening Participation and HE STEM Science, Technology, Engineering and Mathematics (STEM) programmes.
Sponsors
Sponsorship opportunities here
